The EPEVER Tracer AN Series Solar Cost Controller is really a extremely economical solar controller made for off-grid photo voltaic devices. According to multiphase synchronous rectification know-how, it makes sure optimized Electricity conversion and method balance for a wide array of photovoltaic (PV) apps.
Critical Options of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technologies for outstanding solar Strength harvesting. Essential capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
LCD Screen with authentic-time details checking.
Various Load Command Modes which includes handbook and timer.
Comprehensive Digital Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Move Guide to Establishing the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Be certain all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Validate the product variety and voltage ratings match your solar panel and battery technical specs.
2. Mounting the Cost Controller
Pick a well-ventilated, dry site close to the battery financial institution.
Safe the Tracer AN controller using the provided mounting brackets.
Maintain proper clearance for warmth dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Usually adhere to suitable security protocols and ensure the system is run off visit here in advance of connecting parts.
Stage 1: Join the battery terminals on the charge controller (good to favourable, detrimental to adverse).
Action 2: Connect the photo voltaic panel array to your PV input terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery to start with.
Utilize the LCD Exhibit to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Manual, timer, gentle Regulate.
5. Checking and Facts Logging
The Tracer AN Sequence supports genuine-time checking utilizing the MT50 remote meter.
Details is often logged through the RS485 communication port applying program for example Solar Station Computer system.
Remote checking is achievable Using the EPEVER WiFi module.
six. Troubleshooting Widespread Troubles
Issue one: No Energy Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: Above-Voltage Security
Verify the photo voltaic array’s voltage rating.
Regulate program parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Benefits of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology makes certain:
Higher Effectiveness: Diminished Electrical power losses for the duration of conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
Extended Battery Life: Reliable and accurate charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification technological innovation is really an exceptional choice for optimizing solar energy technology and lengthening battery lifestyle. By adhering to the above set up guideline, customers can guarantee most efficiency and technique longevity.